Samsung Galaxy S5 SM-G900T1 Firmwares
Flash/unbrick or upgrade your device with the firmwares below using odin
USA
Android 4.4.2
G900T1UVU1ANE7_G900T1TMB1ANE7 (4 files repair firmware)
Android 5.1.1
To flash or upgrade your Galaxy S5 SM-G900T1 with the firmware above,
- Download and install samsung drivers
- Download and launch odin
- Turn off your phone
- Boot phone into download mode by holding vol down + home + power button
- When you see the yellow triangle, press volume up to continue into odin mode
- Now connect the phone to PC using USB cord
- Wait for odin to detect the phone (you will see the COM Port)
- Now click AP in odin interface then select the firmware
- After the firmware is successfully loaded,
- Click Start button
- Wait for process to complete
- When you see PASS in green then the process is complete.
- Wait for the device to reboot
Its always good to do a factory reset after doing this process
For a more detailed process on how to flash or upgrade Samsung devices, click here
For other Samsung firmwares, click here